The Pikatec MotorBike Ceramic Protection Pack reliably and long-term protects your single-track vehicles. The patented technology with an admixture of nanoparticles of silicon oxides and zirconium increases the hardness of the treated surfaces many times over, so that painted parts, plexiglass and frames of motorcycles or bicycles are much more resistant to scratches, abrasions and surface damage due to UV radiation. The particles are the size of a billionth of a meter, so they reliably fill even the smallest surface irregularities and smooth them almost perfectly. The result is a great gloss of painted parts, treated surfaces repel water, dirt and dirt and are very easy to maintain.
The MotorBike Ceramic Protection Pack contains a product for degreasing the surfaces of motorcycles and bicycles before applying the nano protection, the polish itself and the application cloth. Always apply to surfaces free of all impurities.
Application of nanocosmetics
Applying the products is not complicated at all. You only need 4 steps to it. The surface must first be thoroughly cleaned and degreased. Then apply a protective polish, leave on for 30 minutes and then polish with a microfiber cloth. Always read the current manual.
Surface maintenance after application
The surfaces of motorcycles and bicycles treated with Pikatec nanocosmetics are smoother, much more resistant to damage and in most cases only rinsing with water is sufficient for their maintenance. The treated surfaces will always look like new and the maintenance of the motorcycle or bike is very easy.
Nano Strong Degreaser (50ml) The product is intended for the initial removal of grease adhering to the frames and other parts of motorcycles and bicycles after previous treatments of chains, etc. For motorcycles, it is also used to remove fuel residues from the affected parts. Do not start working with the product until you have washed and dried the motorcycle or bicycle. Nano Degreaser & Polisher (50ml) The ceramic technology Ceramic Nano Degreaser & Polisher penetrates deep into the pores of the surface and can thus remove a wide range of greases that could affect the adhesion and functionality of the protective polish on motorcycles and bicycles. It is therefore used as a final degreaser before its application. Because greases, which cause a temporary reduction in water repellency, are not avoided even on treated surfaces, the product is also suitable for degreasing treated surfaces, whether frames or other components. It is thus a suitable accessory for the maintenance of motorcycles and bicycles after application.
Ochrana motocyklů a kol The Nano Armor Ceramic protective polish smoothes the surface of painted parts and frames and creates an extremely hard and flexible layer on them, which, among other things, helps a lot with resistance against mechanical damage caused by small stones and dust. At the same time, the surfaces close perfectly, so the motorcycle or bike gets less dirty, has a self-cleaning effect and is very easy to maintain. The product provides highlighting of the surface treatment, protection against scratches, protection against the effects of salts and asphalt, protection against pollen and resin from trees, protection against bird droppings, and above all protection against UV radiation. The protective shield withstands extreme temperatures up to 550 ° C.
The enclosed cloth is only used to apply the polish, it is best to use this microfiber cloth to polish the protection.
The number of accessories in the set is enough to treat one motorcycle / bike.
Types of hazards: Flammable liquids with possible eye damage, skin irritation, inhalation hazards and specific target organ toxicity.