Nano Calcium Remover is a very effective product for hard-to-remove residues that cannot be cleaned with commonly available products. It is ideal for preparing various surfaces before applying the nano protections themselves. Its special composition also works in the pores of the cleaned surface and can easily separate even deeply ingrained dirt, which can then be easily wiped off. The most common applications include limescale on glass, tiles and batteries, metals and stainless steel.

Package contents: 150 ml

Directions for use:

Before the application itself, we recommend removing all loose dirt from the surface. First moisten the surface to be cleaned and shake the product thoroughly before use. Spray evenly in sufficient quantity according to the absorbency of the surface. The product can be applied both by spraying and painting, with a cloth or sponge. After application, leave on for 10-30 minutes and then wash the cleaner from surface thoroughly with clean, preferably pressurized water. Always test a small amount of product first in a less visible area to verify the compatibility of the finish and the cleaner. If necessary, we recommend repeating the cleaning process twice or more.

Depending on the type of surface, protect it after cleaning with relevant nano-protect polish: on stainless steel/chrome (Nano Protect Stainless Steel), glass (Nano Protect Glass) or ceramic tiles and equipment (Nano Protect Ceramic & Sanitary). It creates a protective nanolayer on the surface to prevent further adhesion of dirt, oils, water and grease.

Note: The product is not intended for removing stains in the structure of the material (glass, stainless steel, metals, etc.). These are created by the long-term influence of limescale and other chemicals. Surfaces affected in this way can no longer be chemically cleaned in any way, only renovated.

Bezpečnostní upozornění: