Nanotechnology
for surface protection
604 723 723
Mo - Th: 9:00 - 17:00
Fr: 9 - 15 hod.
  1. Homepage
  2. HOME
  3. Surface
  4. Glass-ceramic
  5. Nano Protect Glass-Ceramic 30ml

Ochrana sklo-keramických varných desek

Nano Protect Glass-Ceramic 30ml
Nano Protect Glass-Ceramic 30ml

Ochrana sklo-keramických varných desek

Nano Protect Glass-Ceramic 30ml
Protection of glass-ceramic plates, quantity sufficient for cca 8 m2. A product specially developed for glass-ceramic items such as glass-ceramic hobs, baking oven glass, combi oven glass, glass fireplace covers and everywhere where glass is exposed to very high temperatures.
16.29  EUR (Including VAT)
Skladem

VARIANTS
OPTIONS
Czech technology
Developed with scientists at the Technical University of Liberec.
Long-term protection
Protect your home for up to 2 years.
Clean up less
Cleaning will be much easier and less frequent.
Easy application
We'll help you with aplication.
Fast delivery
Product description

Perhaps the most well-known glass-ceramic surfaces are electric or induction hobs. However, not only these items are facing very high temperatures and they are quickly subject to devastation by dirt, grease and chemicals, which adhere to these surfaces very easily. In most cases, cleaning of the affected areas is only possible mechanically using abrasive tools and chemical preparations containing sands. The removal of burns and stains in this way though means an even greater disruption of the glass structure and a deepening of its unevenness. Grease, dirt and other substances adhere to the surface even easier and their cleaning is almost impossible over the time. On the glass-ceramic surfaces then the irremovable stains and small scratches are remaining.

The Nano Protect Glass-Ceramic closes the glass surface, reduces the sticking and burning of grease, soot and dirt on the glass and withstands extreme temperatures of up to 800 ° C. It provides protection against chemicals as well as against scratches from small dirt and dust, and because the dirt does not stick to the surfaces, the treated surfaces are very easy to maintain. Protection consisting of nanoparticles of silicon oxides and zirconium lasts 6-12 months depending on the frequency of use of cooking equipment. The protective layer repels water, grease and prevents the growth of bacteria, therefore the surface becomes naturally antibacterial. Thanks to the hardness and added UV filters, the treated surfaces are many times more resistant to damage. Do you want to know more about the technology?

ATTENTION: The product can only be polished in final with the help of the product Nano Degreaser & Polisher. Always apply to surfaces free of all impurities.

 

Package content and consumption

The package contains 30 ml of Nano Protect Glass-Ceramic. This is sufficient amount for up to 8m2. For final polishing it is necessary to use it together with product Nano Degreaser & Polisher.

 

Nanocosmetics Application

Applying the products is not complicated at all. You only need to follow four steps. First, the surface must be thoroughly cleaned and degreased. Then apply a protective polish and leave on for 5 minutes to work and polish with a soft cloth. Always read carefully the attached instructions.

 

 

 

Surface maintenance after application

Surfaces treated with Pikatec nanocosmetics are smoother, much more resistant to damage and for their maintenance just a dry or moistened microfiber cloth is sufficient. With just that you will be able to wipe off all dirt easily, the treated surfaces will always look like new and you will not need any other harmful chemicals to clean them. How to clean properly?

 

Instructions for use

Surface preparation: Before application, it is necessary to remove all impurities and grease from the treated surface otherwise it could cause a limited function and shorten the durability of the protection polish. Check if there are no traces of water drops or other stains on the glass-ceramic item. These need to be removed before application, otherwise you would "conserve" them in the protective layer and it would be very difficult to get rid of them afterwards. Always perform the final cleaning / degreasing of the glass-ceramic item with  help of the Nano Degrease & Polisher (formerly Nano Clear Glass) sprayed lightly, preferably on microfibre cloth at best, which you gently rub the surface with.

 

Application: Shake the product well before use and also frequently during application. Using a pump, spray only one dose of protective polish on the application cloth or, for larger areas, on the application pad. Using circular movements then apply a continuous and very thin film of the product to the surface. When working, try not to apply the product over the already covered area, as this would increase the laboriousness and difficulty of both application and subsequent polishing. You don't have to worry - we're in a nano environment and one layer (one swipe on the surface with an application cloth) is perfectly sufficient for surface treatment. After covering the whole area, let the polish harden for 5 minutes. After 5 minutes, start polishing the surface with a microfibre cloth, lightly sprayed with the Nano Degreaser & Polisher. Do not press too hard on the cloth - if you start to feel the more effort is needed than before, add little amount of the Degreaser & Polisher on the cloth and continue working. As the cloth absorbs excess polish, it is advisable to keep folding it and turning it at the time it starts to leave smudges on the polished surface.

The protective polish additionally excludes residual greases (so-called emulsifiers) from the glass-ceramics, which could not be completely removed during the first cleaning, and which can limit the water-repellent effect of the nanolayer. These must be removed from the surface by washing the glass-ceramic by hand with warm water with detergent without additives, such as a universal cleaner, and after drying it cleaneded with a cloth, lightly sprayed with Nano Degreaser & Polisher. If we do not use the treated area immediatelly after the application, it is sufficient to remove the emulsifiers just once, a week to 14 days after it. However, if we treat surfaces that will be in use immediately after the polish has hardened, we recommend that you always carry out this washing process just before use and repeat it after the glass has cooled down for a period of approx. 7 days. If this wasn't done, the residual grease could stick and burn onto the protective layer and it would be much more difficult to get rid of it then.

Aditional information:

  • The protective polish cannot be removed from the surface using a common cleaning chemicals. If the water-repellent properties are locally reduced, for example when greasing the surface, or by covering the nanolayer with soap residues, etc., the area must be thoroughly washed with warm water and, if necessary, the affected area also degreased. The water-repellent effect is then renewed again.
  • The effectiveness of the protective polish depends on the damage degree of the treated glass. If, for example, we want to protect older glass stoves or a hob that we have previously cleaned with abrasive methods, the functionality of the protective polish may be to some extent limited. This is due to microscopically deep scratches and other damage that the product working in the nanometer range does not smooth out, and in which the impurities, due to the exposing to high temperatures, settle and burn much more easily. Likewise, used on plated glass fireplaces or stoves may the effectiveness of the polish be reduced. Especially with fireplace stoves, clogging of the glass is also hugely affected by the type and quality of the fuel.
  • Use the polish immediately after opening the bottle.

Types of hazards: Flammable liquids with possible eye damage, skin irritation, respiration hazard and specific target body organs toxicity.

 

Reviews
No user reviews so far.
User reviews :
User reviews can be submitted only by registered and logged-in users.
Product description
Reviews

Perhaps the most well-known glass-ceramic surfaces are electric or induction hobs. However, not only these items are facing very high temperatures and they are quickly subject to devastation by dirt, grease and chemicals, which adhere to these surfaces very easily. In most cases, cleaning of the affected areas is only possible mechanically using abrasive tools and chemical preparations containing sands. The removal of burns and stains in this way though means an even greater disruption of the glass structure and a deepening of its unevenness. Grease, dirt and other substances adhere to the surface even easier and their cleaning is almost impossible over the time. On the glass-ceramic surfaces then the irremovable stains and small scratches are remaining.

The Nano Protect Glass-Ceramic closes the glass surface, reduces the sticking and burning of grease, soot and dirt on the glass and withstands extreme temperatures of up to 800 ° C. It provides protection against chemicals as well as against scratches from small dirt and dust, and because the dirt does not stick to the surfaces, the treated surfaces are very easy to maintain. Protection consisting of nanoparticles of silicon oxides and zirconium lasts 6-12 months depending on the frequency of use of cooking equipment. The protective layer repels water, grease and prevents the growth of bacteria, therefore the surface becomes naturally antibacterial. Thanks to the hardness and added UV filters, the treated surfaces are many times more resistant to damage. Do you want to know more about the technology?

ATTENTION: The product can only be polished in final with the help of the product Nano Degreaser & Polisher. Always apply to surfaces free of all impurities.

 

Package content and consumption

The package contains 30 ml of Nano Protect Glass-Ceramic. This is sufficient amount for up to 8m2. For final polishing it is necessary to use it together with product Nano Degreaser & Polisher.

 

Nanocosmetics Application

Applying the products is not complicated at all. You only need to follow four steps. First, the surface must be thoroughly cleaned and degreased. Then apply a protective polish and leave on for 5 minutes to work and polish with a soft cloth. Always read carefully the attached instructions.

 

 

 

Surface maintenance after application

Surfaces treated with Pikatec nanocosmetics are smoother, much more resistant to damage and for their maintenance just a dry or moistened microfiber cloth is sufficient. With just that you will be able to wipe off all dirt easily, the treated surfaces will always look like new and you will not need any other harmful chemicals to clean them. How to clean properly?

 

Instructions for use

Surface preparation: Before application, it is necessary to remove all impurities and grease from the treated surface otherwise it could cause a limited function and shorten the durability of the protection polish. Check if there are no traces of water drops or other stains on the glass-ceramic item. These need to be removed before application, otherwise you would "conserve" them in the protective layer and it would be very difficult to get rid of them afterwards. Always perform the final cleaning / degreasing of the glass-ceramic item with  help of the Nano Degrease & Polisher (formerly Nano Clear Glass) sprayed lightly, preferably on microfibre cloth at best, which you gently rub the surface with.

 

Application: Shake the product well before use and also frequently during application. Using a pump, spray only one dose of protective polish on the application cloth or, for larger areas, on the application pad. Using circular movements then apply a continuous and very thin film of the product to the surface. When working, try not to apply the product over the already covered area, as this would increase the laboriousness and difficulty of both application and subsequent polishing. You don't have to worry - we're in a nano environment and one layer (one swipe on the surface with an application cloth) is perfectly sufficient for surface treatment. After covering the whole area, let the polish harden for 5 minutes. After 5 minutes, start polishing the surface with a microfibre cloth, lightly sprayed with the Nano Degreaser & Polisher. Do not press too hard on the cloth - if you start to feel the more effort is needed than before, add little amount of the Degreaser & Polisher on the cloth and continue working. As the cloth absorbs excess polish, it is advisable to keep folding it and turning it at the time it starts to leave smudges on the polished surface.

The protective polish additionally excludes residual greases (so-called emulsifiers) from the glass-ceramics, which could not be completely removed during the first cleaning, and which can limit the water-repellent effect of the nanolayer. These must be removed from the surface by washing the glass-ceramic by hand with warm water with detergent without additives, such as a universal cleaner, and after drying it cleaneded with a cloth, lightly sprayed with Nano Degreaser & Polisher. If we do not use the treated area immediatelly after the application, it is sufficient to remove the emulsifiers just once, a week to 14 days after it. However, if we treat surfaces that will be in use immediately after the polish has hardened, we recommend that you always carry out this washing process just before use and repeat it after the glass has cooled down for a period of approx. 7 days. If this wasn't done, the residual grease could stick and burn onto the protective layer and it would be much more difficult to get rid of it then.

Aditional information:

  • The protective polish cannot be removed from the surface using a common cleaning chemicals. If the water-repellent properties are locally reduced, for example when greasing the surface, or by covering the nanolayer with soap residues, etc., the area must be thoroughly washed with warm water and, if necessary, the affected area also degreased. The water-repellent effect is then renewed again.
  • The effectiveness of the protective polish depends on the damage degree of the treated glass. If, for example, we want to protect older glass stoves or a hob that we have previously cleaned with abrasive methods, the functionality of the protective polish may be to some extent limited. This is due to microscopically deep scratches and other damage that the product working in the nanometer range does not smooth out, and in which the impurities, due to the exposing to high temperatures, settle and burn much more easily. Likewise, used on plated glass fireplaces or stoves may the effectiveness of the polish be reduced. Especially with fireplace stoves, clogging of the glass is also hugely affected by the type and quality of the fuel.
  • Use the polish immediately after opening the bottle.

Types of hazards: Flammable liquids with possible eye damage, skin irritation, respiration hazard and specific target body organs toxicity.

 

No user reviews so far.
User reviews :
User reviews can be submitted only by registered and logged-in users.
Do you need advice?
ContactAnetu
+420 604 723 723
(Mo - Th: 9:00 - 17:00)
Nano Protect Glass-Ceramic 30ml

Ochrana sklo-keramických varných desek

16.29  EUR
Visit an application center in your vicinity:
Visit an application center:
All centers
Log-in form
Log-in name:
Log-in password:




Forgotten passwordNew registration
My account
Sign outOrdersSetting up the account
českyenglishSlovensky