Homepage
BOATS
Nano Shampoo BOAT 200ml

Nano Shampoo BOAT

Nano Shampoo BOAT 200ml

Nano Shampoo BOAT 200ml

Nano Shampoo BOAT 200ml

Nano Shampoo BOAT 200ml

Nano Shampoo BOAT

Nano Shampoo BOAT 200ml

Product code

180404010008

Better descaling properties
More effective dissolving deposits
Stronger degreasing effect

Nano Shampoo BOAT (200 ml) excellently cleans and enhances the cleaned surface. In the first phase, it is used to clean and remove impurities before applying Nano Protect Gelcoat and Nano Protect Antifouling (nanopolitures for gelcoat and antifouling). In the second phase to maintain the surface of the boat after the application of Nano protect Gelcoat and it also extends the life of this polish. (After applying the polish, try to avoid washing the boat with industrial detergents if possible. These reliably destroy all protective polishes and surfaces, including waxes.)

Nano Shampoo BOAT has the ability to dissolve residues, degrease the surface and remove a thin layer of limescale. Nanoparticles (billionths of a meter) easily penetrate the pores of the surface and remove stains from oil and insects. The product is optimal for hand washing of boats. It is harmless to the environment.

200 ml of shampoo is enough to wash an area of up to 400 m2.

Instructions for use:

Shake well before use. The recommended dilution is 20 ml of shampoo per 5 l of pure water - this applies to stainless steel parts, glass, wood and painted parts (gelcoat). Stir the water with the shampoo and let it stand for about 2 minutes. Wash the surface in a circular motion using a soft sponge or microfiber cloth. Remember that the better you clean the surface, the better the adhesion and therefore the durability of the subsequent polish! If heavily soiled, do not hesitate to wash the surfaces twice. Never use common chemical detergents and similar substances for washing, they do not benefit the paint! After washing, rinse the surface with clean water. Allow to dry or wipe off residual water with a wiper, chamois, or large microfiber towel. Rinsing and drying is especially necessary before using the Nano Protect Gelcoat polish. Do not apply in direct sunlight! Video instructions can be found at www.pikatec.cz.

Types of hazards: Irritating to eyes.

A silicone wiper to wipe away water. The fastest method to dry car bodywork or glass. A fine silicon

Utěrky z mikrovlákna Duopack

Polishing Cloth Duopack

Extra jemné utěrky z mikrovlákna 40cm x 40cm jsou nepostradatelným pomocníkem pro dokonalý úklid všech hladkých povrchů a snadné rozleštění politur PIKATEC.

Velký sušící mikrovláknový ručník

Microfibre Drying Towel

Prémiový mikrovláknový ručník nadstandardního rozměru 60 x 90 cm. Vysoká hustota vláken a délka chlupu zaručuje extrémně rychlé a účinné vysušení nejen vozidel jedním tahem. Gramáž ručníku je 1000 g/m2.

A sponge used to wash cars. It is robust and soaks up water very effectively. It is great to work wi

Fine microfibre cloth orange

Polishing Cloth Orange

Extra gentle microfiber cloth 40cm x 40cm is an essential helper for perfect cleaning of all smooth surfaces and easy polishing of PIKATEC polishes.

Fine microfibre cloth white

Polishing Cloth White

Extra gentle microfiber cloth 40cm x 40cm is an essential helper for perfect cleaning of all smooth surfaces and easy polishing of PIKATEC polishes.

Nano Protect Antifouling II BOAT

Nano Protect Antifouling II BOAT

Final protective layer for parts of the ship below the waterline. Protects against biological pollution and wear and tear for a long time. Extremely increases slipperiness and reduces grip. The second part of the two-stage hull protection of the PIKATEC ship. Suitable for both the hull and all surfaces submerged under water, such as propeller, rudder, stainless steel steps, etc. Can also be used as an alternative protection of the gelcoat above the waterline, especially for less accessible and difficult to apply areas with standard protection for gelcoat PIKATEC.

Nano Degreaser & Polisher BOAT

Nano Degreaser & Polisher BOAT 200ml

Nano Degreaser & Polisher for boats is designed for complete degreasing of glass, stainless steel and other metal surfaces, painted parts - gelcoat, wood and leather surfaces, which we are going to be treated with PIKATEC protective polishes- BOAT series. The product is also absolutely necessary for final polishing of protective polishes on glass (Nano Protect Glass BOAT), stainless steel (Nano Protect Stainless BOAT) and gelcoat (Nano protect Gelcoat BOAT). Amount in the packaging is sufficient for up to 30 m2.

Nano Calcium Remover BOAT

Nano Calcium Remover BOAT 200ml

Nano Calcium Remover BOAT is a very effective product suitable for all glass, polycarbonate, stainless and aluminum materials in the interior and exterior, where limescale and difficult to remove lime and mineral deposits are formed. It is also able to clean oxidized metal surfaces. We recommend to use this cleaner for perfect surface cleaning before applying protective polishes. Ultra strong gel cleaner, degreaser and remover of hardened mineral and salt residues, atmospheric impurities, acid grease and extra resistant dirt. Use on aluminum (anodized) surfaces, stainless steel, painted and varnished surfaces, gelcoat and fiberglass. It is a biodegradable concentrate. Product consumption: approx. 20 m2.

Nano Protect Antifouling I BOAT

Nano Protect Antifouling I BOAT

First protective layer for below waterline part of the boats hull. This layer protects the hull, repels algae, dirt and other microorganisms. It prevents their layering and irreversible damage to the ship's hull. Very important feature of this protection is that it is applicable to standard antifouling coatings and thus significantly extends their service life, 2-3 times. Long-term protection against biological pollution and wear. Extremely increases slipperiness and reduces grip. It is the first of two-stage antifouling protection. The amount of 200 ml is enough for about 15 m2.

Nano Protect Gelcoat BOAT

Nano Protect Gelcoat BOAT

The product is intended for long-term protection of gelcoat, painted and plastic parts of ships. The package is enough for about 18 m2. Thanks to this protection, the maintenance of the gelcoat is very easy and your boat will be attarctive for a long time. One application will last for 1-2 years. The preparation of the boat for the season will be much easier.

Nano Protect Wood BOAT

Nano Protect Wood BOAT 200ml

Long-term protection of natural wood and boat teak. Compared to commonly used teak oils it has significantly longer durability. The package content is sufficient for about 18 m2. It is a specially developed polish with antibacterial effect and strong UV filters intended for wood protection. It emphasizes natural properties of different wood types, deepens the drawing of the structure. It fully replaces various teak oils and has a long-term effect on the structure of wood. Suitable for the treatment of unpainted wooden parts of the ship. It prevents the fading of wood colors, provides UV protection, prevents the spread of fungi and molds, closes the surface of the wood with a breathable membrane, so that the wood can continue to "breathe", but does not absorb water and moisture.

Nano Protect Glass BOA

Nano Protect Glass BOAT

Super hydrophobic layer for glass, amount sufficient for up to 10 m2. The product is suitable for the protection of all outdoor and indoor glass or polycarbonate surfaces on ships and boats. It is ideal for treating windows, solar panels and all glazed areas such as glass doors separating the cabin and deck. In the interior of the cabin it is great for treating the shower, glass furniture and mirrors. The main added value is that it protects the glass surfaces from damage from salt, calcium and other chemical compounds that quickly damage the unprotected glass.

Nano Protect Stainless BOAT

Nano Protect Stainless BOAT 50ml

The product is suitable for all stainless steel (inox steel), but also chrome parts of the boat above the waterline. It is ideal for railings, handrails, stainless steel parts of seats and tables, chrome edging of the windshield, as well as accessories made of non-ferrous metals. The treated surface repels all fluids, organic, salt and calcium residues that tend to disrupt the structure of the material. Quantity sufficient for up to 10 m2 .

No user reviews so far.

User reviews :

User reviews can be submitted only by registered and logged-in users.

Better descaling properties
More effective dissolving deposits
Stronger degreasing effect

Nano Shampoo BOAT (200 ml) excellently cleans and enhances the cleaned surface. In the first phase, it is used to clean and remove impurities before applying Nano Protect Gelcoat and Nano Protect Antifouling (nanopolitures for gelcoat and antifouling). In the second phase to maintain the surface of the boat after the application of Nano protect Gelcoat and it also extends the life of this polish. (After applying the polish, try to avoid washing the boat with industrial detergents if possible. These reliably destroy all protective polishes and surfaces, including waxes.)

Nano Shampoo BOAT has the ability to dissolve residues, degrease the surface and remove a thin layer of limescale. Nanoparticles (billionths of a meter) easily penetrate the pores of the surface and remove stains from oil and insects. The product is optimal for hand washing of boats. It is harmless to the environment.

200 ml of shampoo is enough to wash an area of up to 400 m2.

Instructions for use:

Shake well before use. The recommended dilution is 20 ml of shampoo per 5 l of pure water - this applies to stainless steel parts, glass, wood and painted parts (gelcoat). Stir the water with the shampoo and let it stand for about 2 minutes. Wash the surface in a circular motion using a soft sponge or microfiber cloth. Remember that the better you clean the surface, the better the adhesion and therefore the durability of the subsequent polish! If heavily soiled, do not hesitate to wash the surfaces twice. Never use common chemical detergents and similar substances for washing, they do not benefit the paint! After washing, rinse the surface with clean water. Allow to dry or wipe off residual water with a wiper, chamois, or large microfiber towel. Rinsing and drying is especially necessary before using the Nano Protect Gelcoat polish. Do not apply in direct sunlight! Video instructions can be found at www.pikatec.cz.

Types of hazards: Irritating to eyes.

A silicone wiper to wipe away water. The fastest method to dry car bodywork or glass. A fine silicon

Utěrky z mikrovlákna Duopack

Polishing Cloth Duopack

Extra jemné utěrky z mikrovlákna 40cm x 40cm jsou nepostradatelným pomocníkem pro dokonalý úklid všech hladkých povrchů a snadné rozleštění politur PIKATEC.

Velký sušící mikrovláknový ručník

Microfibre Drying Towel

Prémiový mikrovláknový ručník nadstandardního rozměru 60 x 90 cm. Vysoká hustota vláken a délka chlupu zaručuje extrémně rychlé a účinné vysušení nejen vozidel jedním tahem. Gramáž ručníku je 1000 g/m2.

A sponge used to wash cars. It is robust and soaks up water very effectively. It is great to work wi

Fine microfibre cloth orange

Polishing Cloth Orange

Extra gentle microfiber cloth 40cm x 40cm is an essential helper for perfect cleaning of all smooth surfaces and easy polishing of PIKATEC polishes.

Fine microfibre cloth white

Polishing Cloth White

Extra gentle microfiber cloth 40cm x 40cm is an essential helper for perfect cleaning of all smooth surfaces and easy polishing of PIKATEC polishes.

Nano Protect Antifouling II BOAT

Nano Protect Antifouling II BOAT

Final protective layer for parts of the ship below the waterline. Protects against biological pollution and wear and tear for a long time. Extremely increases slipperiness and reduces grip. The second part of the two-stage hull protection of the PIKATEC ship. Suitable for both the hull and all surfaces submerged under water, such as propeller, rudder, stainless steel steps, etc. Can also be used as an alternative protection of the gelcoat above the waterline, especially for less accessible and difficult to apply areas with standard protection for gelcoat PIKATEC.

Nano Degreaser & Polisher BOAT

Nano Degreaser & Polisher BOAT 200ml

Nano Degreaser & Polisher for boats is designed for complete degreasing of glass, stainless steel and other metal surfaces, painted parts - gelcoat, wood and leather surfaces, which we are going to be treated with PIKATEC protective polishes- BOAT series. The product is also absolutely necessary for final polishing of protective polishes on glass (Nano Protect Glass BOAT), stainless steel (Nano Protect Stainless BOAT) and gelcoat (Nano protect Gelcoat BOAT). Amount in the packaging is sufficient for up to 30 m2.

Nano Calcium Remover BOAT

Nano Calcium Remover BOAT 200ml

Nano Calcium Remover BOAT is a very effective product suitable for all glass, polycarbonate, stainless and aluminum materials in the interior and exterior, where limescale and difficult to remove lime and mineral deposits are formed. It is also able to clean oxidized metal surfaces. We recommend to use this cleaner for perfect surface cleaning before applying protective polishes. Ultra strong gel cleaner, degreaser and remover of hardened mineral and salt residues, atmospheric impurities, acid grease and extra resistant dirt. Use on aluminum (anodized) surfaces, stainless steel, painted and varnished surfaces, gelcoat and fiberglass. It is a biodegradable concentrate. Product consumption: approx. 20 m2.

Nano Protect Antifouling I BOAT

Nano Protect Antifouling I BOAT

First protective layer for below waterline part of the boats hull. This layer protects the hull, repels algae, dirt and other microorganisms. It prevents their layering and irreversible damage to the ship's hull. Very important feature of this protection is that it is applicable to standard antifouling coatings and thus significantly extends their service life, 2-3 times. Long-term protection against biological pollution and wear. Extremely increases slipperiness and reduces grip. It is the first of two-stage antifouling protection. The amount of 200 ml is enough for about 15 m2.

Nano Protect Gelcoat BOAT

Nano Protect Gelcoat BOAT

The product is intended for long-term protection of gelcoat, painted and plastic parts of ships. The package is enough for about 18 m2. Thanks to this protection, the maintenance of the gelcoat is very easy and your boat will be attarctive for a long time. One application will last for 1-2 years. The preparation of the boat for the season will be much easier.

Nano Protect Wood BOAT

Nano Protect Wood BOAT 200ml

Long-term protection of natural wood and boat teak. Compared to commonly used teak oils it has significantly longer durability. The package content is sufficient for about 18 m2. It is a specially developed polish with antibacterial effect and strong UV filters intended for wood protection. It emphasizes natural properties of different wood types, deepens the drawing of the structure. It fully replaces various teak oils and has a long-term effect on the structure of wood. Suitable for the treatment of unpainted wooden parts of the ship. It prevents the fading of wood colors, provides UV protection, prevents the spread of fungi and molds, closes the surface of the wood with a breathable membrane, so that the wood can continue to "breathe", but does not absorb water and moisture.

Nano Protect Glass BOA

Nano Protect Glass BOAT

Super hydrophobic layer for glass, amount sufficient for up to 10 m2. The product is suitable for the protection of all outdoor and indoor glass or polycarbonate surfaces on ships and boats. It is ideal for treating windows, solar panels and all glazed areas such as glass doors separating the cabin and deck. In the interior of the cabin it is great for treating the shower, glass furniture and mirrors. The main added value is that it protects the glass surfaces from damage from salt, calcium and other chemical compounds that quickly damage the unprotected glass.

Nano Protect Stainless BOAT

Nano Protect Stainless BOAT 50ml

The product is suitable for all stainless steel (inox steel), but also chrome parts of the boat above the waterline. It is ideal for railings, handrails, stainless steel parts of seats and tables, chrome edging of the windshield, as well as accessories made of non-ferrous metals. The treated surface repels all fluids, organic, salt and calcium residues that tend to disrupt the structure of the material. Quantity sufficient for up to 10 m2 .

No user reviews so far.

User reviews :

User reviews can be submitted only by registered and logged-in users.

Do you need advice?

ContactAnetu

+420 604 723 723

(Mo - Th: 9:00 - 17:00)

info@pikatec.cz

Visit an application center in your vicinity:

Visit an application center: